Sản phẩm

Amarex KRT

Mã sản phẩm : Amarex KRT
Danh mục : Sản phẩm
Thương hiệu : KSB
DLP - Chuyên cung cấp & sửa chữa máy bơm công nghiệp uy tín và chất lượng.

Amarex KRT

Main applications

  • Advanced treatment / 3.stage
  • Ash removal
  • Bio. treatment / 2.stage
  • Biogas
  • Breweries
  • Building services
  • Chemical industry
  • Cooling water and condensate
  • Drainage
  • Drainage pump stations
  • Energy
  • Flood / stormwater holding tanks
  • Flood control
  • Flue gas desulphurization plants (FGD)
  • Food and beverages
  • General Processes
  • Heat transfer, Cooling circuits
  • Industry engineering
  • Irrigation
  • Lake, Damwater extraction
  • Mech. treatment / 1.stage
  • Mining
  • Municipal waste water
  • Oil /Gas
  • Petrochemical Industry
  • Power Stations > 100 MW
  • Pressure Drainage
  • Process
  • Sea -& Riverwater Extraction
  • Sewage treatment plants
  • Special processes
  • Steel
  • Sugar
  • Surface drainage
  • Suspended solids treatment
  • Systems
  • Waste water
  • Waste water / sewage
  • Waste water transport
  • Water
  • Water Extraction
  • Water treatment
  • Water works
  • Watertransport
  • Watertreatment

Overview of technical data

Q (50Hz) 0.0 – 10,080.0 (m³/h)
H (50Hz) 0.0 – 120.0 (m)
Drive Electric motor
Drive frequency 50 Hz /60 Hz
Connection to power supply < 690 V, 3~
Explosion protection ATEX, CSA, FM
Impeller material (EN standard) 1.4517, EN-GJL-250, EN-GJN-HB555
Type of installation Close-coupled
Type of coupling None
Type of lubrication Grease lubrication
Max. permissible fluid temperature 60.0 (°C)
Nozzle position End suction
Maximum operating pressure PN 16
Pump set location Dry installed, Wet well
Shaft material (EN standard) 1.4021, 1.4462, C45+N
Suction characteristics Non-priming
Type of casing Volute casing
Type of impeller Single-channel impeller, Multi-vane impeller, Free flow impeller, Single-vane impeller, Cutter
Type of connection Flange
Casing material (EN standard) 1.4517, EN-GJL-250, EN-GJN-HB555
eClass assignment 36410101, 36410103
Free passage 240.0 (mm)
Installation position Horizontal or vertical
Shaft seal type Mechanical seal
Main applications Energy, Water, Industry and process engineering, Mining / Dredges, Waste water / sewage, Building services
Casing material Cast iron, White cast iron, Cast duplex steel
Maximum discharge-side pressure 12.0 (bar)
Maximum drive rating 850.0 (kW)
Type of installation Transportable, Stationary
Maximum speed of rotation 3600.0 (1/min)